Cues For Sale

PLAYER’S” and “COLLECTOR’S” CUES

FROM ~ “THE OLDEST DEALER OF ANTIQUE CUES IN THE UK”

Looking for something special?

Then look below!

We have an excellent selection of much sought after classic cues.

If we haven’t got the cue you want let us know and we’ll try to provide it for you.

separator1

K103     “BURROUGHS & WATTS”     “EUREKA”    Hand Spiced ~ Jet Black Ebony and Tulipwood Butt ~ Ash Shaft ~ fitted with ‘Ivory’ Ferrule ~10½dmm Tip ~ 57½” Long ~ Weight marked 16ozs.

MUCH SORT AFTER ~ AGING TO A LOVELY DARK PETINA.THIS CUE HAS ONE OF THE NICEST NAMEPLATES THAT “B & W” PRODUCED.   NOTE!  THIS HOWEVER HAS A REPLACEMENT NAMEPLATE BY “TONY GLOVER”  IT DOES NOT DISTRACT FROM THE FACT THIS CUE IS A FIRST EDITION ~ JET BLACK EBONY BUTT.

NOT BEEN ON THE MARKET FOR MANY YEARS ~ USED UP TO A FEW YEARS AGO.

THE GRAIN OF THE SHAFT RUNS TRUE WITH NAMEPLATE.

SMALL WHITE MARK ON THE TIP OF THE NAMEPLATE BUT DOES NOT DETRACT IN ANY WAY – what the mark is I am not sure (paint?), level with immediate area – smooth, no ridge or lip         

*Please Note!  – any good cue maker be able to eliminate this to match its surroundings.

separator1K104    “HORACE LINDRUM”      “CHAMPION CUE”   

“SOLD” (within ” 5 min. of placing on site)

separator1K105 :     “ORME & SONS LTD.”   “MATCH CUE”    LONDON

Hand Spliced ~ Macassar Ebony Butt and Front Splice with Thura Burr Veneer ~ Ash Shaft ~ 57½” Long ~ 10mm Tip ~ Brass Ferrule ~ Weight marked 15½ ozs.

THIS CUE HAS A 1½” DIA. BUTT AND IS MORE LIKELY TO SUIT THE OLDER PLAYER,  ESPECIALLY FOR BILLIARDS.

RARE EARLY CUE AND GOOD COLLECTORS ITEM ~ NOT MANY OF THESE ON THE MARKET – AS YOU CAN SEE IT HAS AN EARLY ATTEMPT (HAND CUT) AT A “TRAPEZOID” SHAPE later PERFECTED BY ‘RILEYS’.~ ( SEE K113 )

NOT BEEN USED IN YEARS ~ FADED NAMEPLATE AS YOU CAN SEE, THE LETTERING CAN BE RE-DONE BY SEVERAL OUTLETS IF REQUIRED.    (Larger picture of the nameplate if required)

separator1K106:     “WILLIE SMITH”   “RECORD CUE”   

Hand Spliced ~ Ebony Butt ~ Cocobolo Front Splice  ~ Ash Shaft ~ 57½” Long ~ 10½mm Tip ~ Brass Ferrule ~ Weight marked 17½ ozs.

WHILST THE NAMEPLATE HAS FADED ON THIS CUE IT IS ONE OF THE BEST OF ITS SORT THAT I HAVE SEEN OVER THE YEARS ~ EASILY READABLE.

LOVELY STRAIGHT GRAIN FROM NAMEPLATE TO TIP ~ CHEVRONS RUN BOTH SIDES OF THE CUE ~ COLOUR AGING NICELY TO A RICH BROWN.

GOOD COLLECTORS ITEM ~ NOT BEEN ON THE MARKET BEFORE AND NOT USED IN YEARS.   I DO HAVE THE ORIGINAL FORMULA FOR THE FILLER THAT USED TO BE IN THE NAMEPLATE OF THIS CUE – WILL SUPPLY THE BUYER WITH THIS WITH PURCHASE.

K106separator1K107 :     “JOHN BENNETT” & Co”    LONDON

“SOLD”

separator1K108 :        “PADMORE”   “ANNIVERSERY CUE”

Machine Spliced ~ Rosewood Butt ~ Maple Shaft ~ 58″ Long ~ 9mm Tip ~ Brass Ferrule ~ Weight marked 17ozs.

NOT MANY MADE OF THIS CUE – REASONABLY RARE ITEM.

ORIGINAL LACQUER ON THE BUTT ~ SHAFT TURNING A LOVELY GOLDEN COLOUR.

PADMORE ANNseparator1K109 :          “NO NAME”  CUE

Hand Splice ~ Ebony Butt with secondry Hand Splices with Green Veneers ~ just under 57½” Long ~ 10mm Tip ~ Brass Ferrule ~ Weight marked 17ozs.

DEAD STRAIGHT GRAIN ~ WITH ‘CHEVRON/DARTS’ RUNNING DOWN EACH SIDE OF CUE.

NICE CLEAN CUE WITH ROUND CREAM COLOURED DISC ~ YOU CAN EASILY PLACE YOUR OWN INITIALS ON THIS AT A GOOD TROPHY SHOP.

separator1

K110 :      “NO NAME”   CUE

Machine Spliced ~ Ebony Butt ~ with Ebony & Maple Veneers ~ Ash Shaft ~ 55 Long ~ Brass Ferrule ~ 8½ mm Tip ~ Original Bone Round Nameplate for your Initials ~ Weight 15½ ozs.

THIS CUE WILL MAKE AN IDEAL POOL CUE ~ IT HAS A THICK BUTT WHICH IS USUAL AS THIS CUE STEMS FROM CIRCA 1900.
separator1K111:        “BURROUGHS & WATTS”      “WILLIE SMITH”     “CHAMPION CUE”

Hand Spliced ~ Macassar Ebony Butt ~ Ash Shaft ~ just over 57″ Long ~ 10¼mm Tip ~ Brass Ferrule ~ Weight 17½ozs.

THIS CUE IS OVERALL THE BEST ONE I HAVE SEEN IN YEARS.

THE SHAFT HAS A BEAUTIFUL STRAIGHT GRAIN.

DEFINATELY  A COLLECTORS ITEM.

separator1K112:      “E. J. RILEY”       “ACCRINGTON”        “OVAL”  NAMEPLATE

Hand Spliced ~ Rosewood Butt ~ Maple Shaft ~ 57½” Long ~ 10mm Tip ~ Brass Ferrule ~ Weight marked 15½ozs.

TOTALLY ORIGINAL THIS CUE WITH THE NAMEPLATE BEING COMPLETELY FLUSH WITH CUE ~ ABLE TO READ EASILY.

THERE IS AN UNUSAL STAMP ON THE CUE IT BEING “7.2” JUST ABOVE ONE OF THE SPLICINGS – NO IDEA WHAT THIS MEANS – SOMEBODY MAY?

PICTURE TO FOLLOW

separator1K113:       “E. J. RILEY”      “ACCRINGTON”       “THE TRAPEZOID CUE”

Hand Spliced ~ Ebony Butt ~ Maple Shaft ~ 56¼ Long ~ 10mm Tip ~ Bras Ferrule ~ marked 16½ ozs.

JUST UNDER NAMEPLATE IS A REPAIR WHICH HAS TO HAVE BEEN DONE YEARS AGO AS IT HAS WORN THE SAME SHAPE AS THE BUTT.

NICE COLLECTORS ITEM.

separator1K128:           “CRAFTSMAN CUES”      “YORKSHIRE ROSE”     LEEDS – ENGLAND     

Hand Spliced ~ Ebony Butt ~ Ash Shaft ~ with Snakewood Front Splice and Green Veneer ~ 57½” Long ~ 10mm Tip ~ Brass  Ferrule ~ Weight 17½ozs. approx.

THIS CUE HAS EVERYTHING GOING FOR IT – WHILST BEING A RELATIVELY MODERN CUE THIS CUE IS AN EARLY MODEL FROM A GOOD YORKSHIRE COMPANY.

THE CUE HAS ONE OF THE BEST EXAMPLES OF SNAKEWOOD THAT I HAVE SEEN ~ THE ASH SHAFT IS ‘DEAD IN LINE’ WITH THE BUTT.

WHOM-SO-EVER BUYS THIS CUE WILL BE BUYING A “ONE-OFF” AND A CUE FOR LIFE.

WOULD MAKE AN IDEAL CHRISTMAS PRESENT.

GREAT COLLECTORS ITEM.

separator1K138 :      NO NAME”     CUE

Hand Spliced ~ Ebony Butt ~ Amboyna Type Burr ~ Green Veneer ~ Ash Shaft ~ touch under 58″ Long ~ 10¾mm Tip ~ Brass Ferrule ~ Weight just under 17ozs.

THIS CUE CAME INTO ME WITH A DAMAGED BUTT IT HAS BEEN REFURBISHED TO A HIGH STANDARD WITH AN “AMBOYNA BURR” FRONT SPLICE.

NICE SOLID ‘STIFF SHAFT’ ON THIS CUE.

K138Aseparator1K147 :     “ORME & SONS”    MANCHESTER  

Machine Spliced ~ Jet Black Ebony Butt  ~ Ash Shaft ~ 58″ Long ~ Original 11¼mm Tip ~ No Ferrule ~ Weight marked 14½ ozs.

THIS IS A CRACKING CUE FOR THE SERIOUS COLLECTOR BEING NEAR ENOUGH TO ‘MINT’ CONDITION.

DEAD STRAIGHT GRAIN DOWN FROM ‘STAMPED NAMEPLATE’ SHOWING COMPANY AND ‘PRINCE OF WALES’ FEATHERS ~ THIS IS AN INDICATION THAT THEY WERE SUPPLIERS TO THE ROYAL FAMILY ~ CHEVRONS RUN DOWN BOTH SIDES OF CUE.

AS STATED AN “ABSOLUTE MUST” FOR A COLLECTOR WANTING THE BEST POSSIBLE.    THE BEST OF ITS SORT THAT I HAVE SEEN OVER THE YEARS ~ EXTREMELY RARE IN THIS CONDITION.

separator1K158 :     “BURROUGHS & WATTS”    “CLUB CUE”  

separator1K164 :      “SPORTS & PASTIMES”      BRADFORD

Machine Spliced ~ Ebony Butt ~ Maple Shaft ~ 58″ Long ~ 11mm Tip ~ No Ferrule ~ Weight marked 16oz. but is 16½ozs.

RARE CUE WITH THIS BADGE ~ IDEAL FOR A COLLECTOR.

NICE CLEAN CUE ~ THIS HAS BEEN IN SAME OWNERS HANDS SINCE BEING BOUGHT NEW.

separator1K165 :     “GEORGE NELSON”    “SELECTED CUE”    LEEDS

Hand Spliced ~ Ebony Butt  ~ Maple Shaft ~ 55½” Long ~ 11mm Tip ~ Brass Ferrule ~ Weight 15½ozs. but marked 17ozs ~ shortening will have caused discrepancy.

WHILST SHORT THIS IS STILL A CRACKING CUE FOR THE SERIOUS COLLECTOR OR A “LEEDS LOINER” POOL PLAYER.

ROUND DISC NAMEPLATE ISSUED BEFORE ‘GEORGE’ TEAMED UP WITH WILLIE SMITH TO BECOME “SMITH & NELSON OF LEEDS” .

HARD TO FIND THESE DAYS IN ANY CONDITION NEVER MIND ‘GOOD’.

K165separator1K166 :    “SIDNEY SMITH”  “PIC. BADGE”   “TOURNAMENT SNOOKER CUE”

“SOLD”

separator1K168 :        “NO NAME”    CUE

Hand Spliced ~ Ebony Butt fitted with new Ebony Front Splice & Red Veneer ~ Ash Shaft ~ 58″ Long ~ 11mm Tip ~ Brass Ferrule ~ Weight marked 17ozs.

THIS CUE HAD A DAMAGED BUTT WHEN IT CAME IN ~ SINCE BEING REFURBISHED IT HAS MADE A GOOD PLAYING CUE.

AGEING NICELY TO A RICH DARK BROWN.

K168separator1K179 :      “BURROUGHS & WATTS”     “EDWARD DIGGLE”      LONDON

 “SOLD”

separator1

K180 :     “A. W. CHICK LTD”    “MATCH CUE No5”    BIRMINGHAM

 “SOLD”

separator1K182 :    TOM NEWMAN”   “CHAMPION CUE”   WORLD RECORD BREAK 1370

“SOLD”

Please Note!      there was some doubt that this cue having the nameplate it has, was made to deceive – however, it appears that this is not the case as other collectors have told me they have one and one has just been bought from a gentleman in Morecambe who had it from when he a young man.

However, with this one, the Morecambe one and a couple of collectors who have phoned me this makes it rather a “RARE” cue and a great collector’s item.

 

separator1

K183 :       “BURROUGHS & WATTS”      STEVENSON CHAMPION CUE

Hand Spliced ~ Maccassar Butt with Mahogany Front Splice ~ Ash Shaft ~ 57¼” Long ~ Brass Ferrule ~ 10mm Tip ~ Weight 16½ozs.

AS YOU CAN SEE FROM THE PICTURE THE NAMEPLATE ON THIS CUE HAS BEEN REPAIRED – THIS WAS DONE ACCORDING TO THE GRANDSON OF THE ORIGINAL OWNER USING A RESIN ( it won’t move now ) ~ “RARE” CUE IN ANY CONDITION.

K183

separator1

K188 :       “BARRACUDA”     GOLD MEDAL CUE

 “SOLD” separator1K190 :       “JOE DAVIS”     “CHAMPION CUE”     RECORD BREAK 100.

 “SOLD”

separator1

K191 :       “BURROUGHS & WATTS”      “MASCOT”

Hand Spliced ~ Ebony Butt with green Veneer ~ Ash Shaft ~ 9½mm tip ~ Brass Ferrule ~ 56½” long ~ Weight 16ozs.

CUE AGEING NICELY ~ TINY TIP OFF FRONT SPLICE.

CHEVRON GRAIN ON SHAFT IN LINE WITH NAMEPLATE.

Mascot

separator1

K194 :       “J. E. BEALE LTD”     “SPORTS DEPOT”     BOURNEMOUTH

Hand Spliced ~ Ebony Butt ~ Ash Shaft ~ Bubinga Front Splice with Ebony, Green and Bubinga thick Veneers ~ 58″ Long ~ Brass Ferrule ~ 10mm Tip ~ Weight marked 15ozs.

PLEASE NOTE! ~ THIS CUE YEARS AGO MUST HAVE BEEN DAMAGED ON ONE SPLICE TO THE RIGHT OF THE NAMEPLATE, IT HAS BEEN HAD A NEW PIECE FITTED AND WHILST VISABLE DOES NOT DETRACT FROM THE CUE IN ANY WAY.

NICE COLOURED SPLICINGS WITH THE GRAIN RUNNING TRUE TO THE NAMEPLATE ~ GOOD COLLECTORS CUE.

K194separator1K201 :      “GUIDE DOGS FOR THE BLIND”     “1st QUALITY HAND MADE CUE”

Hand Spliced ~ Ebony Butt ~ Ash Shaft ~ Rosewood Front Splice with Maple Veneer ~ 58″ Long ~ 10mm Tip ~ Brass Ferrule ~ Weight Marked 16ozs.

NICE CLEAN CUE ~ GRAIN ON SHAFT FOLLOWS THE NAMEPLATE.

THIS CUE HAS BEEN CLEANED OVERALL AT SOMETIME OTHER WISE TOTALLY ORIGINAL.K201

separator1

K202 :       “BURROUGHS & WATTS”     “BLACKWOOD SPECIAL CUE”

 “SOLD” 

separator1

K205 :        “SYDNEY LEE”  M/S   “BILLIARD & SNOOKER CUE” 

Machine Spliced ~ Macassar Butt with Birds Eye Maple front splice and Green Veneer ~ Ash Shaft ~ 56 ½” long ~ Brass Ferrule ~ 11mm Tip ~ Weight 16½ ozs.

THIS CUE IS IN GOOD CONDITION SHOWING LITTLE USE OVER THE YEARS, THE SHAFT NEEDS FEEDING WITH CUE OIL OR BEESWAX.

I BELIEVE THIS CUE WAS MADE TO ORDER THE ‘MARKED & ACTUAL’ WEIGHT BEING BANG THE SAME.

K205separator1K206:         “SYDNEY LEE”   H/S   “SNOOKER CUE”     * Note “PROVISIONALLY SOLD”

Hand Spliced ~ Macassar Ebony Butt ~ Ash Shaft ~ 58” Long ~ 11mm Tip ~ Brass Ferrule ~ Weight marked 16½ozs.

THIS IS A NICE OLD CUE IN GREAT CONDITION ( it has a sliver out of the front splice which I believe slipped the production inspection when made by the manufacturer ~ it does not detract from the cue ~ picture available if required )

GRAIN ON SHAFT RUNS TRUE WITH A REALLY NICE NAMEPLATE.

GREAT  CONDITION.

separator1K207 :      “WALTER DONALDSON”     “SNOOKER CUE”

“SOLD”

separator1

33 thoughts on “Cues For Sale

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  1. Hello there, just wondering what is the asking price for the Barracuda Gold Medal K188 listed on your website? Thank you.
    Cheers,
    Hugh Kent

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  2. Dear JSS Billiard Snooker,

    Would it be possible to get additional pictures of the following product?

    K138 : “NO NAME” CUE

    Hand Spliced ~ Ebony Butt ~ Amboyna Type Burr ~ Green Veneer ~ Ash Shaft ~ touch under 58″ Long ~ 10¾mm Tip ~ Brass Ferrule ~ Weight just under 17ozs.

    THIS CUE CAME INTO ME WITH A DAMAGED BUTT IT HAS BEEN REFURBISHED TO A HIGH STANDARD WITH AN “AMBOYNA BURR” FRONT SPLICE.

    NICE SOLID ‘STIFF SHAFT’ ON THIS CUE.

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS P.S. K138 is available at £165.00 Delivered within the UK.

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  3. K107 the maple shaft cue, I was wondering if you could email me a price please and also if it is straight. Could you forward me a price for a maple shaft riley prize cue as well if in stock.
    Thanks.

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS P.S. K107 John Bennett cue is now for sale at £165.00 Delivered within the UK.

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  4. Hi im interested in some more photos of your
    Club man cue by burroughes and wats K158 and what price is this going for thanks john

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  5. Looking for a stiffer cue than my current ton prarnum, ash 17oz 8.8mm. Whats your price on these three please and opinion of stiffness if possible : K108, K182 and DS1. Thanks

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

  6. Apart from the description and picture of badge plate, do you show other pictures of the cues & prices?

    • Sorry chaps but my computer has been playing me up for quite some time and I have never got round to answering my ‘enquiry’ desk, for some reason my enquiries were hidden from view? really queer???? if I did reply before all the bother please forgive this intrusion.
      If not and you still need to ask me about a cue then please feel free to contact me.
      Again apologies,
      Ken Walton ———- JSS

Leave a comment